what does this symbol mean?
SAE J2012 A scan tool screen showing the code P0455

P0455: Evaporative emission system leak detected (large leak)

An OBD-II trouble code meaning the system that traps fuel vapour has found a large leak.

How to read it

P0455 is one of the standard OBD-II trouble codes stored when the check engine light comes on. SAE J2012, the standard that defines the codes, names it “Evaporative Emission System Leak Detected (large leak)”; a generic list of OBD-II codes calls it “Evaporative Emission Control System Leak Detected (gross leak)”.

Also searched as: code P0455, P0455 code.

Code names follow SAE J2012. Manufacturers add codes of their own, and the same code can have several causes: the vehicle’s service information or a qualified mechanic can say what it means for a particular car.

What the evaporative system monitor checks

The federal rule requires the system to detect any fuel vapour leak at least as large as one caused by a hole 0.040 inch across, and an absence of purge air flow from the evaporative system.

Can you keep driving with code P0455?

Ford’s F-150 manual says that if the indicator stays on, the vehicle should be serviced at the first available opportunity, and that continued driving with it on can mean higher emissions, lower fuel economy, rougher running and more costly repairs.

How the light goes out

Under the federal rule, the check engine light may go out once the fault has not come back during three trips in a row in which its monitor runs without finding it. The system may erase the stored code if the same code has not been registered again in at least 40 engine warm-up cycles.

More OBD-II trouble codes

Sources

Last reviewed September 27, 2026 by Rory Hansen. How we research

Report a problem

Please don’t include personal details.